LS 460 V8-4.6L (1UR-FSE) (2007)
(b) Remove the O-ring from the oil strainer.
6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
(a)
Remove the bolt, lock plate and ATF temperature sensor.
(b) Remove the O-ring from the ATF temperature sensor.
(c)
Disconnect the oil pressure switch connector.
(d) Disconnect the 8 connectors from the solenoid valves.
(e)
Remove the bolt, detent spring cover and detent spring.
(f)
Remove the 17 bolts and valve body.
NOTICE: Do not drop the check ball body and spring.
(g) Disconnect the lever pin from the manual valve.