LS 460 V8-4.6L (1UR-FSE) (2007)
(e)
Connect the 8 connectors to the solenoid valves.
(f)
Connect the oil pressure switch connector.
(g) Coat a new O-ring with ATF and install it to the ATF temperature sensor.
(h) Install the ATF temperature sensor and lock plate with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a)
Coat a new O-ring with ATF and install it to the oil strainer.
NOTICE: Ensure that the O-ring is not twisted or pinched.
(b) Install the oil strainer to the valve body with the 4 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a)
Install the 3 magnets to the oil pan.