LS 460 V8-4.6L (1UR-FSE) (2007)
Standard adjustment washer
NOTICE:
^
Each set contains 2 washers.
^
Using the washer set, perform the adjustment.
5. INSTALL PROPELLER SHAFT HEAT INSULATOR
(a)
Install the propeller shaft heat insulator with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
6. INSTALL FRONT FLOOR NO. 1 HEAT INSULATOR
(a)
Install the heat insulator with the 4 nuts.
Torque: 5.4 N*m (55 kgf*cm, 48 ft.*lbf)
7. INSTALL FRONT EXHAUST PIPE ASSEMBLY
(a)
Install the front exhaust pipe.
8. INSPECT FOR EXHAUST GAS LEAK