LS 460 V8-4.6L (1UR-FSE) (2007)
10. DISCONNECT FRONT SHOCK ABSORBER ASSEMBLY LH
(a)
Remove the bolt and nut, and then disconnect the bottom side of the front shock absorber assembly LH from the front No. 2 suspension lower
arm LH.
11. DISCONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH
SST 09960-20010 (09961-02010, 09961-02050)
(a)
Remove the clip and nut.
(b) Install 2 spacers (SST spacer A) onto the front No. 2 suspension lower arm assembly LH so that there is a space of approximately 1 mm
between the arm and spacers.
SST 09960-20010 (09961-02050)
NOTICE:
^
Make sure to install the spacers (SST spacer A) as the steering knuckle spacer may shift.
^
As SST may become damaged, make sure the space between the arm and spacers is not 1 mm or less.
(c)
Using SST, disconnect the front No. 2 suspension lower arm from the steering knuckle.
SST 09960-20010 (09961-02010)
NOTICE:
^
Do not damage the dust cover.
^
As the dust cover may be damaged, adjust SST with the center nut so that the body and crow are parallel.
^
Make sure to tie the string of SST to the vehicle to prevent SST from dropping.
12. REMOVE STEERING KNUCKLE SUB-ASSEMBLY LH