LS 460 V8-4.6L (1UR-FSE) (2007)
3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
(a)
Remove the 2 clips and air cleaner inlet cover.
4. REMOVE ENGINE ROOM SIDE COVER LH
5. REMOVE ENGINE ROOM ECU COVER
NOTICE:
^
Wipe off any water on or around the engine room ECU cover.
^
Perform these procedures in a dry place away from rain, etc.
^
Do not allow water to enter the ECM through its connector areas, screw areas, etc.
(a)
Remove the 3 bolts and engine room ECU cover.
6. REMOVE TCM
(a)
Disconnect the 4 connectors.
(b) Remove the 2 nuts and TCM.
INSTALLATION
1. INSTALL TCM
(a)
Install the TCM with the 2 nuts.
Torque: 5.5 N*m (56 kgf*cm, 48 in.*lbf)
(b) Connect the 4 connectors.