LS 460 V8-4.6L (1UR-FSE) (2007)
2. Attach the rubber stabilizer (refer to 1 in Figure 32) using instant "super" glue.
3. Start from the rear (near the B-pillar end of the belt molding).
4. Align the end of the rubber stabilizer to the last screw hole in the front door glass outer weatherstrip.
Step D: Add EPT foam to glass run rubber.
1. Add EPT foam to glass run rubber.
Foam Dimensions: 7 x 7 x 70 mm (0.07 x 0.07 x 2.76 in.)