LS 460 V8-4.6L (1UR-FSE) (2007)
(2) Attach sponge sealer (5 x 5 x 925 mm) starting at the front surface of sponge sealer (7 x 7 x 70 mm with brown backing paper).
NOTICE
Ensure both sponge sealer sections, 2 (7 x 7 x 70 mm) with brown backing paper and 3 (5 x 5 x 925 mm), contact each other.
(3) Attach the sponge sealer (12 x 12 x 60 mm) upward.
NOTICE
^
Make sure the glass channel edge is sealed (refer to 1 in Figure 28).
^
Both sponge sealer sections should contact each other at Circle 2.
C. Attach the NEW foam (refer to 5 in Figure 23) overlapping the existing foam (refer to 4 in Figure 23).