LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Alarm Module: Service and Repair
Installation
ENGINE IMMOBILIZER: CERTIFICATION ECU: INSTALLATION
INSTALLATION
1. INSTALL CERTIFICATION ECU
(a) Install the ECU with the nut.
(b) Connect the 2 connectors.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
6. REGISTER ECU CODE
(a) Register the ECU code See: Testing and Inspection/Programming and Relearning/Engine Immobilizer System.