LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2746006.png)
12. INSTALL REAR LH CURTAIN SUB-ASSEMBLY (W/ Rear Door Sunshade) See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Installation
13. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Installation
14. INSTALL REAR DOOR FRAME GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Installation
15. INSTALL REAR DOOR TRIM COVER LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Installation
16. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Installation
17. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Installation
18. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
20. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
21. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
