LS 460 AWD V8-4.6L (1UR-FSE) (2009)
heard.
4.
Operate the slide control switch to the rearmost position.
NOTE
When operating the control switch, the warning buzzer sounds.
After operating the slide control switch the following operations will occur automatically:
^
The head restraint automatically moves to the uppermost position and a beep is heard.
^
The seat cushion length automatically slides to the rearmost position and a beep is heard.
HINT
The two seat operations described above occur simultaneously.
5.
Move the seatback angle switch forward until a beep is heard.
6.
Operate the head restraint height adjustment switch and check that the head restraint moves to the uppermost and lowermost positions normally.
(Refer to 1 in figure 4.)