LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) Connect the connector.
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
5. INSTALL NO. 1 COOLER COVER (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Installation
6. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Spring/Service and Repair/Installation
7. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (W/O Rear Cooler) See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Spring/Service and Repair/Installation
9. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
10. INSTALL DECK TRIM SIDE BOARD RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
11. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
12. INSTALL ROPE HOOK See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Spring/Service and Repair/Installation
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
16. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.