LS 460 AWD V8-4.6L (1UR-FSE) (2009)
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)
(a) Align the speaker to the door position pins A.
(b) Install the speaker with the 2 screws.
NOTE:
Do not touch the cone part of the speaker.
(c) Attach the clamp and connect the connector.
2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)
(a) Temporarily install the speaker by attaching the claw of the speaker to the door panel.
(b) Install the speaker with the 3 screws.
NOTE:
Do not touch the cone part of the speaker.
HINT: Install the screws in the order shown in the illustration.
(c) Connect the connector.
3. INSTALL REAR NO. 1 SPEAKER ASSEMBLY
(a) Install the speaker and attach the clip.
(b) Install the 2 screws.
NOTE:
Do not touch the cone part of the speaker.
(c) Connect the connector.
4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY (W/ Rear Door Sunshade) See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Installation
5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Installation
6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Service and Repair/Installation