LS 460 AWD V8-4.6L (1UR-FSE) (2009)
4. From the multi-information display press HDD Data.
5. Compare the CDDB version on the Navigation System to that on the Navigation Update Tool.
NOTE
^
If the CDDB version on the vehicle is the same as shown on the Navigation Update Tool, then the vehicle does NOT need the update.
^
If the CDDB version on the vehicle is NOT the same as shown on the Navigation Update Tool, then go to the "Vehicle Load" section in this
TSIB.
Tool Load
Loading CDDB Data onto Navigation Update Tool
NOTE
There are two separate processes used to update the CDDB data on the vehicle:
^
Loading the CDDB data onto the Navigation Update Tool.
^
Loading the CDDB data into the vehicle HDD Navigation System.
If the CDDB version on the Navigation Update Tool is the same as shown on TIS, then go to the "Vehicle Load" section in this TSIB.
If the CDDB version on the Navigation Update Tool is NOT the same as shown on TIS, then follow the instructions below.
NOTE
^
In order to perform the following procedure, the PC being used MUST be in Administrator Mode. Software will NOT complete CDDB download
if this is not met.
^
Before performing this procedure, disconnect all other USB peripheral and external storage devices (i.e., USB thumb drives, hard drives,
cameras, mice, etc.).
1. Log into TIS.
2. Download the CDDB data file.