LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Fuel Door Release Actuator: Service and Repair
Removal
ENGINE HOOD / DOOR: FUEL LID OPENER MOTOR ASSEMBLY: REMOVAL
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
2. REMOVE ROPE HOOK See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
3. REMOVE ROPE HOOK ASSEMBLY See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
4. REMOVE DECK TRIM SIDE BOARD LH See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
5. REMOVE DECK TRIM SIDE BOARD RH See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
6. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
7. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (W/O Rear Cooler) See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Removal
8. REMOVE NO. 1 COOLER COVER (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Removal
9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
10. REMOVE REAR FLOOR FINISH PLATE See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Removal
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Removal
12. REMOVE FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 nuts and fuel filler opening lid lock.