LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Parts Information
Required Tools & Equipment
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
Repair Procedure
1. Installation of outside windshield molding deflector.
A. Remove left hand (LH) roof drip side molding from base of the windshield up to first clip of roof above windshield.
B. Remove lip seal from roof drip side molding and remove residual double sided tape from molding.
C. Apply primer (3M 06396) to clean surface once double sided tape is removed.
NOTE
Do NOT apply primer to painted surface of molding.