LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Attach the 16 claws to install the outside grille.
(b) Install the 2 clips.
4. INSTALL RADIATOR GRILLE PROTECTOR
(a) Clean the radiator grille surface.
(1) Using a heat light, heat the radiator grille surface.
(2) Remove the double-sided tape from the radiator grille.
(3) Wipe off any tape adhesive residue with cleaner.
(b) If reusing the protector.
Clean the protector.
(1) Remove the double-sided tape from the protector.
(2) Wipe off any tape adhesive residue with cleaner.
(3) Apply new double-sided tape to the protector, as shown in the illustration.
(c) Install the protector.
(1) Remove the peeling paper from the face of the protector.
NOTE:
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(2) Attach the 9 clips to install the protector.