LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Attach the 4 clips.
(b) Attach the 7 claws to install the front door scuff plate.
55. INSTALL FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure described for the LH side.
56. INSTALL REAR SEAT ASSEMBLY (for Fixed Type)
(a) Install the rear seat See: Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Installation.
57. INSTALL REAR SEAT ASSEMBLY (for Power Seat)
(a) Install the rear seat See: Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Installation.
58. INSTALL FRONT SEAT ASSEMBLY
(a) Install the front seat See: Seats/Service and Repair/Front Seat Assembly/Installation.
59. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
60. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
61. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
Disassembly
INTERIOR: ROOF HEADLINING (for Standard Body): DISASSEMBLY
DISASSEMBLY
1. REMOVE ROOF SILENCER PAD
(a) W/O Sliding Roof:
Remove the 4 roof silencer pads.