LS 460 AWD V8-4.6L (1UR-FSE) (2009)
33. REMOVE ASSIST GRIP SUB-ASSEMBLY
HINT: Use the same procedure for all the assist grips.
(a) Using a screwdriver, detach the 4 claws and remove the 2 assist grip covers.
HINT: Tape the screwdriver tip before use.
(b) Detach the 2 clips and remove the assist grip.
34. REMOVE VISOR BRACKET COVER
HINT: Use the same procedure to remove the cover on the other side.
(a) Using a moulding remover, detach the 4 claws and remove the visor bracket cover.
35. REMOVE VISOR ASSEMBLY LH
(a) Remove the 2 screws and visor.
36. REMOVE VISOR ASSEMBLY RH
HINT: Use the same procedure described for the LH side.
37. REMOVE VISOR HOLDER
HINT: Use the same procedure to remove the holder on the other side.
(a) Turn the visor holder approximately 45° and pull it out as shown in the illustration.
(b) Detach the 2 claws and remove the visor holder.