LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1818002.png)
(a) Remove the cushion from the brake pedal.
Reassembly
BRAKE: BRAKE PEDAL SUPPORT: REASSEMBLY
REASSEMBLY
1. INSTALL BRAKE PEDAL SUB-ASSEMBLY
(a) Install the cushion to the brake pedal.
2. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY
(a) Install the brake pedal support to the brake pedal with the hexagon bolt and nut.
Torque: 28 Nm (290 kgf-cm, 21 ft-lbf)
3. TEMPORARILY INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY
(a) Temporarily install the brake pedal stroke sensor with the 2 bolts.
HINT: Tighten the brake pedal stroke sensor with the 2 bolts after adjusting the brake pedal height and brake pedal stroke sensor.
