LS 460 AWD V8-4.6L (1UR-FSE) (2009)
10. Follow the instructions on Techstream and press "Next".
IMPORTANT
DO NOT press the brake pedal at this time.
A. Attach the vinyl tube and bottle.
B. Loosen the RR (Rear Right) bleeder screw.
NOTE
This step removes air from the RR (Rear Right) line and actuator.
If Techstream displays the message shown in Figure 31:
^
Repeat "Section 1: Zero Down Accumulator Pressure".
^
Repeat "Section 2: Disable Electronic Controlled Brakes".
^
Repeat "Section 3: Front Brake Bleed'; except for manually bleeding front brake circuits.
^
Repeat "Section 4: Rear Brake Bleed".