LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Remove the push rod clevis and lock nut.
HINT: If the protrusion of the push rod in relation to the push rod clevis is measured beforehand, it is easier to perform the brake pedal height
adjustment after the brake master cylinder with simulator is installed.
5. DISASSEMBLE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Remove the screw and brake master cylinder reservoir.
(b) Remove the 2 reservoir grommets from the brake master cylinder.
Reassembly
BRAKE: BRAKE MASTER CYLINDER: REASSEMBLY
REASSEMBLY
1. ASSEMBLE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Apply lithium soap base glycol grease to 2 new reservoir grommets and install them to the brake master cylinder.