LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1842005.png)
(a) Disconnect the No. 2 brake actuator hose from the No. 3 brake actuator bracket and then remove the clamp.
(b) Remove the hose clip and No. 2 brake actuator hose.
(c) Remove the hose clip and reservoir connector.
30. REMOVE NO. 3 BRAKE ACTUATOR TUBE
NOTICE:
-
Do not damage the No. 3 brake actuator tube, brake actuator and brake accumulator pump.
-
When removing the No. 3 brake actuator tube, hold the tube, brake actuator and brake accumulator pump securely.
(a) Using a union nut wrench (10 mm), disconnect the No. 3 brake actuator tube.
31. DISCONNECT BRAKE ACCUMULATOR PUMP CONNECTOR BOX
