LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Procedures for calibration.
(1) Turn the engine switch on (IG).
(2) Check that the inner mirror's LED illuminates green.
(3) Check that one of the following directions is displayed: N, NE, E, SE, S, SW, W, NW.
(4) Press and hold the inner mirror's AUTO switch for 3 seconds, and check that CAL is displayed on the compass.
(5) Perform calibration by driving the vehicle at 8 km/h (5 mph) or less in a circle.
(6) Drive in a circle 1 to 3 times, and check that calibration is completed by confirming that CAL is not displayed on the compass.
HINT: After the calibration is performed once, calibration will not be necessary unless the vehicle's magnetic field changes drastically. If the
magnetic field has changed, CAL will be displayed on the compass.