LS 460 AWD V8-4.6L (1UR-FSE) (2009)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
12. CHECK LUGGAGE ROOM JUNCTION BLOCK ASSEMBLY (REAR JUNCTION BLOCK ECU) (TIL1, TIL2 VOLTAGE)
(a) Disconnect the S64 ECU connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPLACE LUGGAGE ROOM JUNCTION BLOCK ASSEMBLY (REAR JUNCTION BLOCK ECU)
OK -- REPLACE REAR COMBINATION LIGHT ASSEMBLY
13. CHECK HARNESS AND CONNECTOR (REAR LIGHT - REAR JUNCTION BLOCK ECU AND BODY GROUND)
(a) Disconnect the S63 ECU connector.
(b) Disconnect the S33 and S41 light connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH