LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(h) Install the oil filter drain plug.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
NOTE:
Be careful that the O-ring does not get caught between the parts.
5. ADD ENGINE OIL
(a) Add fresh oil and install the oil cap.
Standard engine oil:
Standard capacity:
(b) Install the oil filler cap.
(c) Close the oil filler cap service hole cover.
6. INSPECT FOR ENGINE OIL LEAK See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pressure Sender/Service and
Repair/Installation
7. CHECK ENGINE OIL LEVEL See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Testing and Inspection
8. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER
(a) Install the service hole cover with the screw.