LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Power Distribution Module: Service and Repair
Installation
OTHER SYSTEM: VOLTAGE INVERTER: INSTALLATION
INSTALLATION
1. INSTALL VOLTAGE INVERTER ASSEMBLY
(a) Install the voltage inverter with the 2 nuts.
(b) Connect the connector.
2. INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Rear
Console Box (for Ottoman)/Installation
3. INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Rear
Console Box (for Ottoman)/Installation
4. INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Rear
Console Box (for Ottoman)/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
7. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.