LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Install the engine room ECU cover with the 3 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
5. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
6. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
9. PERFORM RESET MEMORY
NOTE:
Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.
-
for 2WD: See: Transmission Control Systems/Testing and Inspection/Programming and Relearning/AA80E Automatic Transmission
System/Initialization
-
for AWD: See: Transmission Control Systems/Testing and Inspection/Programming and Relearning/AA80F Automatic Transmission
System/Initialization
HINT: Initialization cannot be completed by only removing the battery.
10. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.