LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1254072.png)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE OR CONNECTOR (AFS ECU)
OK -- REPLACE AFS ECU
10. CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (DISPLAY AND NAVIGATION OR MULTI-DISPLAY)
NOTE:
For vehicles without multi-display, go to "CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (INTEGRATION CONTROL AND
PANEL ASSEMBLY)".
(a) Disconnect the L59 display and navigation (multi-display) connector.
(b) Select "CAN Bus Check" on the Techstream.
Result
B -- CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (INTEGRATION CONTROL AND PANEL ASSEMBLY)
A -- Continue to next step.
11. CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (DISPLAY AND NAVIGATION ASSEMBLY OR MULTI-DISPLAY BRANCH
WIRE)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
