LS 460 AWD V8-4.6L (1UR-FSE) (2009)
SST: 09224-00010
without SST - Torque: 44 Nm (449 kgf-cm, 32 ft-lbf)
with SST - Torque: 40 Nm (408 kgf-cm, 30 ft-lbf)
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
-
Make sure SST and the wrench are connected in a straight line.
(b) Connect the air fuel ratio sensor connector.
HINT: Hook the wire harness to the bracket.
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Using SST, install the air fuel ratio sensor to the exhaust manifold RH.
SST: 09224-00010
without SST - Torque: 44 Nm (449 kgf-cm, 32 ft-lbf)
with SST - Torque: 40 Nm (408 kgf-cm, 30 ft-lbf)
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
-
Make sure SST and the wrench are connected in a straight line.
(b) Connect the air fuel ratio sensor connector.
HINT: Hook the wire harness to the bracket.
3. INSTALL ENGINE AND TRANSMISSION
(a) Install the engine and transmission See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation.