LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Parking Brake Control Module: Service and Repair
Installation
PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: INSTALLATION
INSTALLATION
1. INSTALL ELECTRIC PARKING BRAKE ECU
(a) Install the parking brake ECU with the 2 nuts.
Torque: 5.5 N·m (56 kgf·cm, 49 in·lbf)
(b) Connect the 2 connectors.
(c) Install the seat belt control ECU with the 2 nuts.
Torque: 5.5 N·m (56 kgf·cm, 49 in·lbf)
(d) Connect the 2 connectors.
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk
/ Liftgate Spring/Service and Repair/Installation
3. INSTALL DECK TRIM SIDE BOARD LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
4. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Spring/Service and Repair/Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
8. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. PERFORM CALIBRATION
(a) Clear the electric parking brake ECU memory and acquire tension sensor zero point See: Brakes and Traction Control/Parking Brake
System/Testing and Inspection/Programming and Relearning.