LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Headlamp Alignment Control Module: Service and Repair
Installation
LIGHTING: AFS ECU: INSTALLATION
INSTALLATION
1. INSTALL AFS ECU
(a) Install the AFS ECU with the 3 nuts.
(b) Connect the connector and clamp.
2. INSTALL COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Installation
3. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
6. PERFORM INITIALIZATION
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
7. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT See: Lighting and Horns/Headlamp/Adjustments
8. PREPARATION FOR HEADLIGHT AIMING (Using a screen) See: Lighting and Horns/Headlamp/Adjustments
9. HEADLIGHT AIMING INSPECTION See: Lighting and Horns/Headlamp/Adjustments
10. HEADLIGHT AIMING ADJUSTMENT See: Lighting and Horns/Headlamp/Adjustments