LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Seat Belt Control Module: Service and Repair
Installation
PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION
INSTALLATION
1. INSTALL SEAT BELT CONTROL ECU
(a) Install the ECU with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the 2 connectors.
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk
/ Liftgate Spring/Service and Repair/Installation
3. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
4. INSTALL DECK TRIM SIDE BOARD LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
5. INSTALL ROPE HOOK See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
6. INSTALL LUGGAGE COMPARTMENT NO. 1 TRIM HOOK See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Spring/Service and Repair/Installation
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk /
Liftgate Spring/Service and Repair/Installation