LS 460 AWD V8-4.6L (1UR-FSE) (2009)
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Engage the 5 hooks (A).
(b) Engage the 5 hooks (B) and install the front passenger airbag on the instrument panel.
(c) Install the 2 screws.
(d) Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL NO. 3 HEATER TO REGISTER DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
3. INSTALL DEFROSTER NOZZLE ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
5. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Reassembly
6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT: Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Installation.
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
(a) Perform initialization See: Service Precautions.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.