LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Air Bag: Testing and Inspection
Curtain Shield Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check See: Testing and Inspection/Pinout Values and Diagnostic Parameters.
(b) With the curtain shield airbag installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the
curtain shield airbag with a new one:
Cuts, minute cracks or marked discoloration on the curtain shield airbag.
2. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check See: Testing and Inspection/Pinout Values and Diagnostic Parameters.
(b) With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
curtain shield airbag with a new one:
-
Cuts, minute cracks or marked discoloration on the curtain shield airbag.
-
Cracks or other damage to the connectors.
NOTE:
For removal and installation procedures of the curtain shield airbag, be sure to follow the correct procedure.