LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2659013.png)
(a) Insert the claw of the retractor (a) into the hole.
(b) Align the seat belt positioning hole with the claw and install the retractor of the seat belt with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Connect the pretensioner connector, as shown in the illustration.
4. INSTALL NO. 4 AIR DUCT REAR (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Installation
5. INSTALL NO. 5 AIR DUCT REAR (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Installation
6. INSTALL ROOF SIDE NO. 2 AIR DUCT LH (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Air Conditioning Unit (for Rear Side)/Installation
7. INSTALL ROOF SIDE NO. 2 AIR DUCT RH (W/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Air Conditioning Unit (for Rear Side)/Installation
8. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (W/ Rear Sunshade) See: Windows and Glass/Windows/Window
Shade/Service and Repair/Rear Sunshade Assembly/Installation
9. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (W/ Rear Sunshade) See: Windows and Glass/Windows/Window Shade/Service and
Repair/Rear Sunshade Assembly/Installation
10. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (W/O Rear Sunshade)
(a) Except Ottoman:
(1) Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.
(2) Attach the 5 claws and 2 clips to install the package tray trim panel assembly.
