LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Remote Switch: Service and Repair
Removal
AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and
settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE SWITCH AND VOLUME CASE See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
4. REMOVE NO. 2 STEERING WHEEL COVER LOWER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
5. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
6. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 screws and steering pad switch.