LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Camshaft Position Sensor: Service and Repair
Removal
1UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: REMOVAL
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and camshaft position sensor.