LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Alternator: Service and Repair
Reassembly
1UR-FSE CHARGING: GENERATOR: REASSEMBLY
REASSEMBLY
1. INSTALL GENERATOR ROTOR BEARING
(a) Using SST and a press, press a new generator rotor bearing into the drive end frame.
SST: 09950-60010
09951-00500
SST: 09950-70010
09951-07100
(b) Align the protrusions of the retainer with the drive end frame's cutouts, and then install the retainer with the 4 screws.
Torque: 3.0 Nm (30 kgf-cm, 27 in-lbf)
2. INSTALL GENERATOR ROTOR ASSEMBLY
(a) Install the generator rotor assembly.
(b) Install the generator washer.
3. INSTALL GENERATOR COIL ASSEMBLY