LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2292012.png)
(a) Disconnect the L33 steering lock actuator connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the L33 steering lock actuator connector.
(d) Measure the voltage according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.
