LS 460 AWD V8-4.6L (1UR-FSE) (2009)
2. INSPECT DRIVE PLATE
(a) Check the drive plate for damage.
(b) Set up a dial indicator and measure the runout of the 6 portions around the torque converter fitting surfaces.
Maximum runout:
0.30 mm (0.018 in.)
If the runout is more than the maximum or if the drive plate is damaged, replace the drive plate.
If installing a new drive pate, be careful of the orientation of the spacers and tighten the bolts See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Installation.