LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1663004.png)
(a) Remove the bolt, lock plate and ATF temperature sensor.
(b) Remove the O-ring from the ATF temperature sensor.
(c) Disconnect the oil pressure switch connector.
(d) Disconnect the 8 connectors from the solenoid valves.
(e) Remove the bolt, detent spring cover and detent spring.
(f) Remove the 17 bolts and valve body.
(g) Disconnect the lever pin from the manual valve.
NOTE:
Do not drop the check ball body and spring.
(h) Remove the check ball body and spring.
Installation
AA80E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
