LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(h) Remove the check ball body and spring.
7. REMOVE TRANSMISSION WIRE
(a) Disconnect the 3 speed sensor connectors.
(b) Disconnect the wire connector.
HINT: Detach the claw, press down the lever, and then disconnect the transmission wire connector.
(c) Remove the bolt and pull out the transmission wire to remove it.
(d) Remove the O-ring from the transmission wire connector.
Installation
AA80F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring with ATF and install it to the transmission wire connector.
(b) Install the transmission wire.
(c) Install the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)