LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(c) Using SST, install the companion flange.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03020
-
As a bearing spacer is not installed, if SST is tightened excessively, SST, the companion flange, and drive pinion will be damaged.
-
Support the drive pinion by hand until SST is installed.
-
Be careful not to drop the drive pinion.
-
Before using SST center bolt, apply hypoid gear oil to its threads and tip.
-
Install the companion flange so that there is some free play in the drive pinion.
(d) Remove SST.
(e) Using SST and a torque wrench, tighten the flange nut little by little until it reaches the specified preload.
SST: 09213-58013
SST: 09330-00021
SST: 09229-55010
Maximum torque:
490 N*m (4997 kgf*cm, 361 ft.*lbf)
-
Tighten the nut with a force of 100 N*m (1020 kgf*cm. 74 in.*lbf) while checking the starting torque of the drive pinion.
-
As the bearing spacer is not installed, tighten the flange nut little by little. Do not overtighten the nut.
-
Do not overtighten the nut, as the threads will become damaged.
-
Coat the threads the flange nut and drive pinion with hypoid gear oil LSD.
-
Perform the installment while supporting the overhaul attachment.