LS 460 AWD V8-4.6L (1UR-FSE) (2009)
DIFFERENTIAL: FRONT DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL (for AWD): REPLACEMENT
REPLACEMENT
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. DRAIN DIFFERENTIAL OIL See: Fluid - Differential/Testing and Inspection
3. REMOVE ENGINE ASSEMBLY
(a) Remove the engine assembly See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine/Removal.
4. INSTALL ENGINE ON ENGINE STAND See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
5. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY See: Differential Carrier/Service and Repair/Removal and Replacement/Front
Differential Carrier Assembly/Removal
6. REPLACE FRONT DIFFERENTIAL CASE OIL SEAL
(a) Set the differential carrier to an overhaul stand, as shown in the illustration.
(b) for LH:
(1) Using SST, remove the oil seal LH.
SST: 09308-00010
(2) Using SST and a hammer, tap in a new oil seal LH to the differential carrier assembly.
SST: 09608-32010
SST: 09950-70010
09951-07100
Standard depth:
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)