LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) Install the oil strainer to the valve body with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Install the 3 magnets to the oil pan.
(b) Install a new gasket and the oil pan to the transmission case with the 9 bolts.
Torque: 7.4 Nm (75 kgf-cm, 65 in-lbf)
NOTICE:
-
Make sure that there is no oil or foreign matter on the gasket seal surface and oil pan contact surface.
-
Install the gasket so that there is no slack in the gasket, and that the seal surface's entire circumference is level.
-
Make sure that the 9 gasket drop prevention protrusions are securely inserted into the oil pan grooves.
-
When tightening the oil pan, make sure that the gasket is not pinched between the gasket tightening area sleeve and the transmission seal
surface.
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
8. INSTALL COWL TOP VENTILATOR LOUVER See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
9. ADD AUTOMATIC TRANSMISSION FLUID
(a) Add automatic transmission fluid See: Automatic Transmission/Transaxle/Service and Repair/Procedures/AA80F Automatic Transmission.