LS 460 AWD V8-4.6L (1UR-FSE) (2009)
LF1A TRANSFER: TRANSFER CASE FRONT OIL SEAL: REPLACEMENT
REPLACEMENT
1. DRAIN TRANSFER OIL See: Fluid - Transfer Case/Service and Repair
2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) Remove the front propeller shaft assembly See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal
and Replacement/Front Propeller Shaft Assembly/Removal.
3. REMOVE TRANSFER CASE PLUG
(a) Using a 17 mm straight hexagon wrench, remove the plug and gasket.
4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
(a) Using SST, hold the companion flange in place and remove the companion flange bolt.
SST: 09213-58013
SST: 09330-00021
(b) Remove the companion flange from the transfer assembly.
5. REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL
(a) Using SST, tap out the oil seal.
SST: 09308-00010