LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(4) Loosen the 5 belt line screws indicated by the arrows.
NOTE
These 5 screws do NOT have to be fully removed
(5) Remove the 4 screws and belt molding (See Figure 22).
NOTICE
Remove any remaining fragments of the 3 rivets on the molding assembly.
Repair Procedure
Perform the required repairs as described below.
Step A: Add EPT foam behind the chrome belt molding.
1. Add EPT foam behind the chrome belt molding.
Dimensions: 5 x 5 x 925 mm (0.20 x 0.20 x 36.40 in.)