LS 460 AWD V8-4.6L (1UR-FSE) (2009)
10. INSTALL FRONT FENDER PROTECTOR UPPER RH
HINT: Use the same procedures described for the LH side.
11. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
12. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
13. INSTALL FRONT WIPER ARM LH
(a) Stop the wiper motor at the automatic stop position.
(b) Clean the wiper arm serration with a round file or equivalent.
(c) Clean the wiper pivot serration with a wire brush.
(d) Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Standard measurement:
Torque: 22.0 Nm (224 kgf-cm, 16 ft-lbf)
HINT: Hold down the wiper arm hinge with your hand while tightening the nut.
14. INSTALL FRONT WIPER ARM RH