LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NG -- CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK -- Continue to next step.
2. CHECK TOUCH SWITCH (OPERATION CHECK)
(a) Enter the "Display Check" mode and select "Touch Switch Check" See: Initial Inspection and Diagnostic Overview/Operation Check.
(b) Touch the display in the area where the switch malfunction occurs.
OK:
A "+" mark appears at the touched position.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Problem Symptoms Table
OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Entertainment Systems/Television / Monitor/Service
and Repair/Removal and Replacement/Multi-Display (w/o Navigation System)/Removal