LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2506002.png)
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before
disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal
6. REMOVE NO. 3 BOX PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Front
Console Box (w/o Rear Seat Entertainment System)/Removal
7. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal
8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal
9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and
Repair/Removal
10. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET
(a) w/o Navigation System:
Remove the display and navigation module display with bracket See: Entertainment Systems/Television / Monitor/Service and
Repair/Removal and Replacement/Multi-Display (w/o Navigation System)/Removal.
(b) w/ Navigation System:
Remove the display and navigation module display with bracket See: Navigation System/Navigation Display/Service and Repair/Removal
and Replacement/Removal.
(c) for HDD Navigation System:
Remove the display and navigation module display with bracket See: Navigation System/Service and Repair/Removal and
Replacement/Display and Navigation Assembly/Removal.
11. REMOVE TELEPHONE AND GPS ANTENNA CORDS (ANTENNA CORD SUB-ASSEMBLY)
(a) Disconnect the 2 connectors.
(b) Detach the clip and remove the antenna cord.
